Serving the Corpus Christi area  ·  (361) 600-9211  ·  Open Mon-Sun 7am-7pm
📞 (361) 600-9211 Free Quote

Metal Roofing in Taft, TX (78390) · Local Professionals

Corpus Christi Metal Roofing · Fast response in Taft and the Corpus Christi area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+347Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Taft is a small, proud town just north of Corpus Christi, where the housing stock is a mix of older single-story homes, brick ranches, and a fair number of farm and shop buildings on larger lots. The flat coastal plain and sandy-to-clay soil mean water can pool after a heavy rain, and the intense Gulf sun and salt air wear on roofs year-round.

Homeowners in Taft (78390) call Corpus Christi Metal Roofing because we understand the local conditions: wind-driven rain, summer hail, and the occasional tropical storm that peels back panels. We are based in Corpus Christi and serve Taft and the surrounding areas, and we have worked on everything from small bungalows near Taft High School to metal barns and commercial sheds along Highway 181.

Metal Roofing in Taft (78390)

Taft sits on flat ground with a mix of small residential lots and larger agricultural parcels. Many homes are older, with low-pitched roofs that were originally shingled, and those roofs often have multiple layers that can hide soft spots or failed flashing. The soil here shifts with wet and dry cycles, which can affect how a roof settles and where leaks show up. Metal roofs are a good fit because they shed water fast, resist wind uplift, and reflect the sun, but proper installation matters: we check decking, replace rotten fascia, and make sure fasteners are set to the right depth and torque for the panel type. On farm buildings and shops, we often deal with wide spans and open framing, so we verify purlin spacing and use screws with washers designed for metal-to-wood connections.

Our team has installed and repaired metal roofs across the Coastal Bend, including standing seam, corrugated panels, and stone-coated steel. We know the local suppliers, the permit office, and the weather patterns that stress a roof here. When we inspect a roof in Taft, we look for the same things a homeowner would notice after a storm: loose panels, missing screws, dents from hail, and leaks at chimneys or skylights.

Our services in Taft

How a Job Works in Taft

Step 1: You call us at (361) 600-9211 or request a free estimate online. We schedule a time to come out to your property in Taft, inspect the roof and attic if accessible, and talk through what you are seeing. We provide a written estimate with options, and we answer any questions about materials, timelines, and permits.

Step 2: Once you approve the scope, we pull the required permits from the city or county (rules vary, so we verify with the local building department). On the work day, our crew arrives with materials and equipment. For a re-roof, we remove the old roofing down to the deck, replace any damaged sheathing, and install underlayment and the new metal roof. For repairs, we match existing panels and fasteners as closely as possible. We keep the site organized and safe, and we respect your property and neighbors.

Step 3: After the work is done, we clean up thoroughly, including magnet sweeps for nails and screws. We walk the roof and the ground with you, show you what was done, and make sure you are satisfied. We also provide care tips and a warranty summary. We leave your property clean and your roof ready for the next storm season.

Pricing for metal roofing in Taft depends on the size and complexity of your roof, the material you choose, and the condition of the decking. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, and metal shingle or stone-coated steel at $9. For repairs, metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. These are starting prices, and your actual quote will reflect your specific roof. Call (361) 600-9211 for a free estimate.

My Taft home has an older shingle roof with a low pitch. Can you install metal over it, or do I need a full tear-off?
It depends on the number of existing layers and the condition of the decking. Local code limits how many layers you can have, so we check that first. If the deck is solid and the pitch is suitable, a metal roof over shingles (retrofit) can save you on disposal costs. We will inspect and give you a straight answer.
A storm just blew through Taft and lifted some panels on my shop. How fast can you respond?
We prioritize storm damage calls. Call us at (361) 600-9211 and we will schedule an inspection as soon as possible, often within a day or two depending on volume. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What is the typical cost to replace a metal roof on a 1,500 square foot home in Taft?
For a standard replacement with corrugated or ribbed panels, you might be in the range of $8,000 to $12,000, depending on the number of panels, trim, and any decking repairs. Standing seam or stone-coated steel will be higher. We give free estimates so you know exactly what your roof needs.
Do I need a permit from the City of Taft for a metal roof replacement?
Yes, a permit is commonly required for a full replacement or re-roof. Requirements and fees vary, so we verify with the City of Taft building department before starting work. We handle the permit application and inspections as part of the job.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
In Texas, you generally have the right to have your roof overhang within your property line, but it is best to check your plat and local ordinances. If there is an HOA, they may have design rules about overhangs and colors. We can help you understand the requirements and coordinate with your neighbor if needed.
Are you fully insured for work in Taft, and what does that cover?
Yes, we carry general liability insurance and workers' compensation. General liability covers damage to your property, and workers' comp covers our crew in case of injury.
What maintenance should I do on my metal roof in Taft to prevent leaks?
Check for loose or missing screws after big storms, keep gutters clear of debris, and rinse off salt and dirt a couple times a year. Look for dents from hail or fallen limbs. If you see any, call us for a repair. A yearly inspection can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Corpus Christi

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Corpus Christi

All your work handled by qualified professionals in Corpus Christi

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

347+ Verified Client Reviews in Corpus Christi

⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Corpus Christi · Response within 24h · No commitment · ☎ (361) 600-9211

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Corpus Christi ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm