Serving the Corpus Christi area  ·  (361) 600-9211  ·  Open Mon-Sun 7am-7pm
📞 (361) 600-9211 Free Quote

Metal Roofing in Ingleside, TX (78362) · Local Professionals

Corpus Christi Metal Roofing · Fast response in Ingleside and the Corpus Christi area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+347Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ingleside sits right on the bay, and the salt air here works on roofs every single day. Most homes in 78362 are modest brick and frame ranches from the 1950s to 1970s, with a growing number of newer builds near the ship channel and along Highway 361. The wind off Corpus Christi Bay never really stops, and that constant breeze is what separates roofing here from roofing inland.

We are Corpus Christi Metal Roofing, and we have been climbing ladders in Ingleside for years. Whether you are near Ingleside High School or out toward the bayfront, we know how the coastal gusts and salt spray attack fasteners, seams, and flashing. That is why homeowners and property managers here call us for metal roof repair and screw replacement before a small leak turns into a ceiling stain.

Metal Roofing in Ingleside (78362)

Ingleside is flat, sandy, and close to the water, which means drainage and wind uplift are the two things we watch on every roof. The older ranches often have low-pitch shingle roofs that have taken decades of sun and salt, and the fasteners on any metal roof nearby are prime targets for corrosion. We see a lot of wind-lifted panels and backed-out screws after a good blow, especially on homes near the ship channel and the refineries where the air is extra salty. Tight lots in the older parts of town mean we plan material staging carefully so we do not block driveways or trample flower beds.

Our team has worked on everything from small bungalows off Main Street to metal roofs on commercial buildings along the highway. We know how to read the signs of salt damage and wind fatigue that are common here, and we bring the right fasteners and sealants for a coastal climate. If you are in Ingleside and need a metal roof that can handle the Gulf breeze, we are the crew that lives and works in this air every day.

Our services in Ingleside

How a Job Works in Ingleside

Step 1: You call us at (361) 600-9211, and we set up a free on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and take photos so you can see exactly what we see. We will also check for any signs of storm damage that your insurance might cover, and we will give you a written estimate before any work starts.

Step 2: Once you approve, we schedule the work. In Ingleside, that often means coordinating with the local building department for permits, especially on a full replacement. If you are in an HOA or a historic district, we help you get the color and profile approved before we order materials. On tight lots, we stage panels and tools in your driveway or yard in a way that keeps access clear, and we protect landscaping with tarps where needed.

Step 3: When the job is done, we clean up every nail and scrap, blow off the driveway and walkways, and do a final walkthrough with you. We make sure you know what was done and how to care for your new metal roof. We do not leave until you are satisfied and your property is as clean as we found it.

Pricing for metal roofing in Ingleside depends on the size of your roof, its pitch and access, the condition of the existing roof, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a full replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot, but keep in mind local code limits how many layers you can cover. Repairs like leak fixes start at $450, and screw replacement and re-fastening starts at $750. For a free estimate tailored to your Ingleside home, call us at (361) 600-9211.

My metal roof near the ship channel has screws backing out. Is that common in Ingleside?
Yes, it is very common here. The constant wind and salt air work the fasteners loose over time, and once a screw backs out, water can get behind the panel. We replace the screws with coated, corrosion-resistant fasteners and re-seal the holes. We also check the neoprene washers, which dry out and crack in our sun. If you are seeing screws on the ground or rust streaks on the panels, call us at (361) 600-9211 for a free inspection.
A storm just blew through Ingleside and lifted some panels on my roof. Can you help quickly?
We can. Storm and wind damage is one of our specialties, and we offer free inspections for storm damage. We will tarp any active leaks if needed, document the damage for your insurance claim, and give you a repair estimate. We cannot promise insurance will cover everything, but we can help you file the paperwork correctly. Call (361) 600-9211 and we will get out to your property as soon as possible.
What does a typical metal roof repair cost in Ingleside?
Most repairs start around $450 for a leak fix, and screw replacement and re-fastening starts at $750. The final price depends on the size of the repair, how accessible the roof is, and whether we find additional damage. We always give you a written estimate before we start, so there are no surprises. For a free estimate on your specific roof, call (361) 600-9211.
Do I need a permit for a metal roof replacement in Ingleside?
In most cases, yes. The City of Ingleside requires permits for a full replacement or re-roof, and the rules can vary depending on the scope of work. We handle the permit application for you and make sure the work meets local code, including the limit on how many layers of shingles you can cover. We always defer to the local building department for the final say, but we will guide you through the process.
My HOA has rules about roof color and style. Can you help with approval?
Yes. We work with HOA boards in Ingleside regularly. Before we order materials, we can provide product samples and specifications for your HOA to review. If you are in a historic district, there may be additional design review, and we can help you prepare the submission. We want to make sure the roof you choose is approved before we install it, so you do not have to worry about a violation later.
Is your crew covered by insurance for work on my Ingleside property?
We are fully insured, with general liability and workers' compensation coverage. That means if anything goes wrong on your property, you are protected. You can feel confident that our team is covered while we are on your roof.
What kind of maintenance does a metal roof need in Ingleside's climate?
Because of the salt air and wind, we recommend an annual inspection, especially after storm season. We check for loose or missing screws, corrosion, and sealant wear. Keeping gutters clean is also important, since debris can trap moisture against the panels. A simple coating every few years can extend the life of the finish. Call us at (361) 600-9211 to schedule a maintenance check.
Why choose us?

Trusted professionals in Corpus Christi

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Corpus Christi

All your work handled by qualified professionals in Corpus Christi

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

347+ Verified Client Reviews in Corpus Christi

⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Corpus Christi · Response within 24h · No commitment · ☎ (361) 600-9211

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Corpus Christi ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm