Licensed & Insured, in Corpus Christi and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Corpus Christi
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (361) 600-9211 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Corpus Christi and surrounding areas · On-site visits included · Free estimate within 24h
Corpus Christi Metal Roofing is a team of local certified professionals based in Corpus Christi. We respond quickly in Corpus Christi and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (361) 600-9211⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews
“Had these guys put a metal roof on our hangar down near the water, and they knew exactly what they were doing with the salt air. They used the right fasteners and panels for coastal conditions, and the whole thing went up in about a week with a crew of five. No rust worries now.”
Commercial Metal Roofing
“We redid our front entry and had them install a new metal roof over that section. The standing seam panels look sharp and the flashing around the entry was done clean. Took them two days and they hauled off every scrap.”
Metal Roof Installation
“Our cotton operation needed the barn roof redone before harvest and they got us squared away fast. Corrugated panels, solid fastening, and they worked around our schedule so we weren't shut down. Grateful for that timing.”
Agricultural Metal Roofing
“Standing seam install on our house, roughly 2,400 square feet, and the finished look exceeded what I pictured. Crew was respectful and the cleanup was honestly better than before they started. Only gripe is the schedule slipped a few days, but the work itself is top notch.”
Standing Seam Metal Roofing
“We had a leak right where a pipe comes through the metal roof and it had been driving me nuts for months. They tracked it down, redid the flashing and sealant around the post, and we've had zero drips since. Relieved is an understatement.”
Metal Roof Leak Repair
“Full replacement on our place after the old roof finally gave out. They tore off the old panels, checked everything underneath, and had the new metal on in three days. House looks like a completely different property now.”
Metal Roof Replacement
“Did the retrofit over our existing shingles on a waterfront place in Fulton and I was surprised how smooth it went. No tear-off mess, and the new panels handle the wind off the bay way better than the old roof ever did. Small thing: I wish they'd given a bit more notice on the start day, but the result is great.”
Metal Roof Over Shingles (Retrofit)
“Had them add gutters matched to our metal roof along the front walkway, and it finally solved the water pooling by the entrance. Clean install, and they even re-secured a couple of loose panels while they were up there. Solid work all around.”
Gutters for Metal RoofsReal photos of our work in Corpus Christi · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel install | Starting at $8/sq ft | Includes panels, synthetic underlayment and fasteners; simple roof shape lowers the rate. |
| Standing seam install | Starting at $12/sq ft | Concealed fasteners and raised seams; low pitch and complex hips raise the price. |
| Stone-coated steel or metal shingle | Starting at $11/sq ft | Includes textured panels and trim; steep pitches and many penetrations add labor. |
| Complex or large-scale job | On estimate | Stilts, multiple valleys and skylights need an on-site walk before pricing. |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes tear-off of one shingle layer, underlayment, panels, and standard trim |
| Standing seam, complex hip or dormered roof | Starting at $13/sq ft | More cuts, valleys, and trim work raise labor on bayfront and historic homes |
| Hurricane-zone mechanically seamed upgrade | Starting at $15/sq ft | Heavier 24-gauge panels and closer clip spacing for island and waterfront homes |
| Deck repair or sheathing replacement | On estimate | Soft sheathing and rotten fascia need an on-site look before we quote |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel replacement | Starting at $9/sq ft | Includes tear-off, new underlayment, and corrugated or ribbed panels on a simple roof. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams, priced higher for complex rooflines and steep pitches. |
| Stone-coated steel or metal shingle | Starting at $13/sq ft | Includes profile-matched panels and trim, with cost rising for tile-style profiles and HOA approvals. |
| Complex or large-scale job | On estimate | Multi-valley roofs, multiple tear-off layers, and decking repairs need an on-site look before pricing. |
| Travel | Included | In Corpus Christi and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (361) 600-9211, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel retrofit | Starting at $7/sq ft | Includes underlayment, panels, and basic flashing over one existing shingle layer on a simple gable roof. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-fastener panels with battens and premium underlayment, priced higher for complex hips and valleys. |
| Stone-coated steel retrofit | Starting at $13/sq ft | Tile-look steel panels over existing shingles, with cost rising for steep pitches and multiple roof planes. |
| Deck repair and sheathing replacement | On estimate | Priced per sheet after we probe the deck, since soft spots only show up once we open the surface. |
| Travel | Included | in Corpus Christi and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, pipe boot) | Starting at $450 | Covers a small number of backed-out screws, a failed pipe boot, or a seam reseal, with water test included |
| Panel replacement | Starting at $650 | Replaces one or more damaged panels with matching profile and color, price rises with panel count and pitch |
| Flashing rebuild (chimney, skylight, wall) | Starting at $750 | Rebuilds failed flashing in metal rather than caulk, price moves with height and access difficulty |
| Storm or wind damage repair | On estimate | Requires an on-site look to assess panel lift, fastener failure, and whether the decking is wet |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Covers tracing and fixing one leak source, such as a failed fastener line or pipe boot. |
| Multi-point leak repair | Starting at $750 | Handles two or more leak sources on the same roof, including fasteners and flashing details. |
| Flashing and penetration rebuild | Starting at $650 | Rebuilds flashing at chimneys, skylights, or parapets, with height and access driving the price. |
| Emergency tarping | Starting at $350 | Temporary weatherproofing after storm or tropical downpour, priced by roof size and access. |
| Complex or large-scale job | On estimate | Needs an on-site look when the source is unclear or damage spans multiple roof sections. |
| Travel | Included | In Corpus Christi and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (361) 600-9211, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers inspection and replacement of scattered loose or corroded fasteners on a typical single-story roof. |
| Full roof re-fastening | Starting at $1,450 | Replaces every screw and washer on the roof; total rises with square footage and panel count. |
| Oversized screw retrofit | Starting at $1,900 | Steps up to larger-diameter screws where original holes have wallowed; priced by the number of damaged points. |
| Two-story or steep-pitch roof | On estimate | Height and pitch change the access and safety setup, so we look before quoting. |
| Travel | Included | in Corpus Christi and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, standard ranch home | Starting at $5.50/sq ft | Includes panels, fasteners, closures, trim, and labor on a straightforward single-story roof. |
| R-panel roof with tear-off of old shingles | Starting at $6.75/sq ft | Adds tear-off, disposal, and deck inspection; multi-layer roofs and soft decking push it higher. |
| Over-shingle retrofit with purlins | Starting at $6.25/sq ft | Saves tear-off cost when decking is solid; limited by code to a set number of existing layers. |
| Barn, shop, or ag building | On estimate | Span, height, access, and whether insulation is specified all change the number significantly. |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle repair (minor) | Starting at $450 | Includes replacing a few lifted or dented shingles, resealing penetrations and checking fasteners. |
| Metal shingle roof installation | Starting at $9/sq ft | Includes tear-off, underlayment, metal shingles and standard flashing; pitch and access move the price. |
| Metal shingle roof replacement | Starting at $11/sq ft | Includes removal of multiple layers, deck repair and new wind-rated fastening for coastal exposure. |
| Complex or large-scale job | On estimate | Steep roofs, historic profiles, multiple penetrations and two-story access need an on-site look first. |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation | Starting at $9/sq ft | Includes underlayment, concealed fasteners, and standard trim; pitch and roof complexity move the price. |
| Tear-off and deck repair | Starting at $2/sq ft | Covers removal of old shingles or tile, disposal, and replacement of soft sheathing as needed. |
| Retrofit over one shingle layer | On estimate | Code limits recovery to a set number of layers, so we verify deck condition first. |
| Complex or large-scale job | On estimate | Multiple valleys, steep pitch, or two-story access need an on-site look before we quote. |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, entry) | Starting at $20/sq ft | Includes formed copper panels and soldered details; price rises with roof complexity and access height. |
| Full copper roof | Starting at $28/sq ft | Covers full copper panels, underlayment, and custom flashing; higher cost on cut-up roofs with valleys. |
| Zinc or aluminum architectural roof | Starting at $22/sq ft | Includes panels, high-temp underlayment, and trim; alloy choice and panel width move the price. |
| Custom fabrication and historic profile matching | On estimate | Requires an on-site look at original profiles, deck condition, and design review requirements. |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard reflective coating | Starting at $2.50/sq ft | Includes pressure wash, prep, and one reflective topcoat on a sound roof; square footage and pitch move the price. |
| Rust treatment and coating | Starting at $3.25/sq ft | Adds rust conversion and spot priming at cut edges and fastener heads; extent of oxidation drives cost. |
| Elastomeric system | Starting at $3.75/sq ft | Thicker bridging film for older corrugated panels; panel condition and seam count affect the rate. |
| Fastener replacement add-on | From $1.50 per fastener | We replace backed-out or rusted screws during prep; count and access determine the total. |
| Complex or large-scale job | On estimate | Steep pitches, heavy rust, or tight access near palms and oaks need an on-site look before we quote. |
| Estimate | Free | Response within 24 hours at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single skylight re-flash | Starting at $600 | Includes removal of old sealant, new curb flashing, and UV rated sealant on one skylight. |
| Chimney flashing repair | Starting at $850 | Includes new step and counter flashing with proper laps around a standard masonry chimney. |
| Valley or dormer flashing | Starting at $750 | Includes replacement of valley metal or dormer edge flashing with correct laps and fasteners. |
| Complex or multi-penetration job | On estimate | Multiple chimneys, skylights, or two story access require an on-site look before pricing. |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and edge reinforcement | Starting at $1,200 | Includes inspection, re-fasten of loose panels, and edge and ridge checks; price rises with roof height and panel count |
| Reflective coating application | Starting at $1,800 | Includes surface prep and one coat on sun-exposed slopes; price rises with roof square footage and pitch |
| Sealant and closure renewal | Starting at $1,200 | Includes removal of failed sealant and new closures at valleys and penetrations; rises with the number of penetrations |
| Panel and clip replacement | On estimate | Salt corrosion and impact damage vary too much by roof for a phone number, so we inspect first |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing and fastener inspection with photo documentation and written assessment, no obligation. |
| Minor panel and fastener repair | Starting at $350 | Replace isolated lifted or punctured panels and re-fasten sheared screws along eave and ridge lines. |
| Flashing and penetration repair | Starting at $450 | Rebuild flashing collars, pipe boots and skylight surrounds where wind-driven rain forced water in. |
| Ridge, hip and valley rebuild | On estimate | Complex hip and valley roofs need an on-site look to price bent ridge caps and valley metal replacement. |
| Emergency tarping | Starting at $300 | Temporary weatherproofing after a storm to stop active water intrusion until permanent repair is scheduled. |
| Insurance documentation package | Included with repair | Photos, measurements and written scope prepared to support your claim from inspection through completed work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Routine roof condition inspection | Free estimate | On-roof visual check with photo report, priced by roof size, pitch, and number of penetrations. |
| Fastener and seam audit | Starting at $250 | Hands-on screw torque, washer, and seam check on older exposed-fastener and standing seam roofs. |
| Insurance documentation inspection | On estimate | Photo-documented storm or hail report scoped after an on-site look at damage extent and access. |
| Stilt or multi-level coastal home | On estimate | Underside and ladder work on Padre Island and Mustang Island homes priced after access review. |
| Travel | Included | in Corpus Christi and surrounding Coastal Bend areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (361) 600-9211, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter, standard run | Starting at $9/linear ft | Includes 5-inch or 6-inch seamless trough, hidden hangers, and basic downspouts on a single-story metal roof. |
| Standing seam with seam clamps | Starting at $13/linear ft | Non-penetrating clamps that grab the seam without a screw, preserving the panel warranty and finish. |
| Oversized trough and extra outlets | Starting at $15/linear ft | 7-inch trough and added downspouts for large roof planes that overflow in Gulf cloudbursts. |
| Debris guard system | Starting at $4/linear ft | Stainless or aluminum mesh sized for palm fronds, live oak leaves, and mesquite litter. |
| Complex or large-scale job | On estimate | Two-story access, multiple roof planes, waterfront exposure, or fascia repair needs an on-site look first. |
| Travel | Included | In Corpus Christi and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written estimate | Free | Full walk of panels, fasteners, and flashing, with photos and a written scope |
| Targeted repair or re-fastening | Starting at $650 | Screw replacement, washer renewal, and flashing repair on smaller commercial or ag roofs |
| Exposed-fastener panel re-roof | Starting at $4.50 per sq ft | Coated ribbed panels installed, with gauge and salt-zone coating driving the price |
| Standing seam or insulated panel system | On estimate | Wide spans, insulation, and concealed clips need an on-site look before a number |
| Travel | Included | in Corpus Christi and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (361) 600-9211, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Corpus Christi need someone who understands this coast, not a crew that treats South Texas like any other market. Corpus Christi Metal Roofing connects you with a network of licensed, insured local contractors who install, replace, re-roof, and repair metal roofing across the Coastal Bend. We work on the low-pitch ranch roofs of Alta Vista and Hillcrest, the stucco and tile subdivisions out toward Calallen and Annaville, the elevated beach homes on Padre and Mustang Islands, and the waterfront properties along Ocean Drive. Salt air, hurricane wind, and relentless Gulf sun are hard on every roof here, and a large share of the metal roofs we see are 15 to 30 year old exposed-fastener systems that need honest attention.
From Corpus Christi to Ingleside, Aransas Pass, Rockport, and Fulton, we match the right panel system to the house and the budget. That means telling you when a repair makes more sense than a replacement, and when a coating will buy you years versus when it is money wasted. Start with a free estimate and we will walk the roof, explain what we find, and give you straight guidance.
Most metal roof leaks we diagnose in Corpus Christi trace back to the fasteners. On an exposed-fastener roof, each screw carries a small EPDM sealing washer, and after 15 to 30 years of UV and heat those washers dry out, shrink, and crack. The screw has not moved much, but the seal is gone, and water finds it. That is the number one cause of leaks on older screw-down roofs. The second is seam separation: panels expand and contract with thermal movement, and if the seams or closures were not detailed for that movement, gaps open. Beyond those, failed pipe boots, flashing at chimneys, skylights, and valleys, wind-lifted panels after a tropical storm, and punctures from fallen limbs round out the list.
Ignoring a small leak is expensive. Water tracks along purlins and decking, sometimes traveling many feet from the actual entry point before it shows up as a stain on your ceiling. By then the sheathing may be soft and the insulation soaked, and what looked like a minor repair becomes a decking replacement. That is why we chase the source, not the stain.
The honest call is often repair, not replacement. If the panels and finish are sound and the problem is fasteners and seals, a full screw replacement and re-fastening with new washers frequently restores a watertight roof for a fraction of the cost of a new one. If the metal itself is corroded through or the deck is failing, we will tell you that plainly too. Call (361) 600-9211 to schedule a metal roof leak repair visit, or reach out through our contact page.
We install the full range of metal systems, and the right one depends on your house, your budget, and how much maintenance you want to sign up for. Standing Seam Metal Roofing uses concealed clips and hidden fasteners, so there are no exposed screws to service, and it is the premium choice for salt air and hurricane wind. Corrugated & Ribbed Panel Roofing is the economical workhorse, common on barns, workshops, and cabins. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound, and a full tear-off is the right call when it is not.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. Either way, the price depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, the condition of the decking, and access to the roof. A simple low-pitch ranch and a cut-up two-story with valleys and dormers are very different jobs. We give typical ranges so you can plan, but final pricing depends on the roof and site conditions, and we confirm it after we see the property.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer. For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can put real numbers to your roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is document the damage accurately so you have solid information to work with.
On permits, this is informational only. In most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Corpus Christi building or planning department before starting your project. To get started, reach out through our contact page.
Ready to get started? Corpus Christi Metal Roofing serves in Corpus Christi and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Corpus Christi · Response within 24h · No commitment · ☎ (361) 600-9211
Your Free Quote Request