Serving the Corpus Christi area  ·  (361) 600-9211  ·  Open Mon-Sun 7am-7pm
📞 (361) 600-9211 Free Quote

Metal Roofing in Aransas Pass, TX (78336) · Local Professionals

Corpus Christi Metal Roofing · Fast response in Aransas Pass and the Corpus Christi area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+347Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Aransas Pass is a working fishing town where the salt air never takes a day off, and neither do the roofs. The mix of older bungalows near the harbor, mid-century ranches along Commercial Street, and stilt houses out toward Redfish Bay means we see every kind of roof challenge this coast can throw at a home.

Homeowners in 78336 call Corpus Christi Metal Roofing because we understand what salt, sun, and storm wind do to a roof here. From the live oaks bending over Harbor Drive to the boat trailers parked in half the driveways, we know this town and we know how to keep its roofs tight.

Metal Roofing in Aransas Pass (78336)

Aransas Pass sits on flat coastal ground with sandy soil and a water table that can get high after a heavy rain. That means drainage matters as much as the roof itself. Lots are tight in the older parts of town, especially around the harbor and along streets like Wheeler and Maddox, so staging materials and getting a crew safely on a low-pitched ranch roof takes planning. Many homes here have original 1950s and 60s shingle roofs that have been patched more than once, and the constant salt air eats at fasteners and flashing long before the panels themselves fail. We also work on the stilt and elevated homes closer to the water, where wind uplift is the main concern and every seam and screw has to be right.

Our team has been installing, repairing, and replacing metal roofs across the Corpus Christi area for years, and Aransas Pass is one of our regular stops. We know which suppliers can get standing seam panels here quickly, which local inspectors want to see specific fastening patterns, and how to schedule work around the fishing season and summer storm patterns.

Our services in Aransas Pass

How a Job Works in Aransas Pass

Step 1: You call us at (361) 600-9211 or request a free estimate online. We schedule a time to come out and look at your roof, whether it is a small leak repair on a Harbor Drive bungalow or a full replacement on a ranch off Highway 35. We inspect the decking, flashing, and fasteners, and we give you a written estimate before any work starts.

Step 2: Once you approve the estimate, we pull the required permits with the City of Aransas Pass and schedule the work. On tight lots near the water, we plan material delivery and staging carefully so we do not block neighbors or damage landscaping. If your home is in an HOA or a historic area, we help you get the color and panel profile approved before we order materials.

Step 3: When the job is done, we walk the property with you, clean up every screw and scrap, and make sure you know how to care for your new roof. We do not leave until you are satisfied and the site is clean.

Pricing for metal roofing in Aransas Pass depends on the size and pitch of your roof, the condition of the decking, how accessible the property is, and how soon you need the work done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a metal roof over existing shingles starts around $7 per square foot. Repairs like leak fixes or flashing work typically start around $450, and screw replacement or re-fastening starts around $750. Coating and painting an existing metal roof starts around $2.50 per square foot, which is a cost-effective way to extend the life of a roof that is still structurally sound. Call us at (361) 600-9211 for a free estimate on your specific roof.

My house is near the harbor in Aransas Pass and the salt air has eaten through the screws on my metal roof. Can you replace just the fasteners?
Yes. Screw replacement and re-fastening is one of our most common jobs in Aransas Pass. Salt air corrodes fasteners faster here than inland, and once the washers fail, water gets in. We replace the screws with corrosion-resistant fasteners and check the panels and flashing while we are up there. Starting around $750, depending on roof size and how many screws need replacing.
A storm just blew through and lifted some panels on my roof in Aransas Pass. How fast can you get out here?
We offer free storm and wind damage inspections and prioritize emergency calls in the Aransas Pass area. Call us at (361) 600-9211 and we will schedule the earliest available inspection, usually within a day or two depending on storm volume. We document the damage for your insurance claim and can often make temporary repairs to prevent further water intrusion while you wait for approval.
What does a metal roof cost for a typical three-bedroom ranch house in Aransas Pass?
For a typical 1,500 to 2,000 square foot ranch with a low-pitch roof, a basic corrugated or ribbed panel roof might run $5.50 to $8 per square foot installed, while standing seam is closer to $10 per square foot. A full replacement with removal of the old shingles adds to that. The best way to get a real number is a free on-site estimate, since decking condition and access can change the price. Call (361) 600-9211.
Do I need a permit to replace my roof in Aransas Pass, and who handles that?
Yes, the City of Aransas Pass generally requires a permit for a full roof replacement or re-roof, and the requirements can vary depending on the scope of work. We pull the permits for you and coordinate with the local building department to make sure the job meets current code, including limits on how many layers of shingles can be recovered over. We handle that paperwork so you do not have to.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage problems for them. What should I do?
That is a common concern in Aransas Pass where lots are close together. We design the roof and gutter system to direct water away from the property line and onto your own lot, and we can install gutters that carry water to a safe discharge point. If your neighborhood has an HOA, we also help you get the panel profile and color approved before installation. It is always best to talk with your neighbor early, and we are happy to walk the property line with you.
Are you fully insured for work on my property in Aransas Pass?
Yes, Corpus Christi Metal Roofing is fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
What kind of maintenance does a metal roof need in Aransas Pass to survive the salt air and summer storms?
In Aransas Pass, the main things to watch are fasteners, flashing, and debris buildup. We recommend an annual inspection, especially after storm season, to check for loose or corroded screws, sealant wear around flashing and penetrations, and any debris trapped in valleys or behind chimneys. A coating or paint refresh every several years can also help extend the life of the panels. We offer free estimates for inspections and maintenance.
Why choose us?

Trusted professionals in Corpus Christi

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Corpus Christi

All your work handled by qualified professionals in Corpus Christi

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

347+ Verified Client Reviews in Corpus Christi

⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Corpus Christi · Response within 24h · No commitment · ☎ (361) 600-9211

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Corpus Christi ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm